How To Fix A Leaky Faucet?

There is nothing worse than having the constant sound of dripping coming from a faucet. The drip, drip, drip, will drive you nuts. For some people, a quick fix would be to turn off the water to the sink all together. Then, turning it back on and off every time you use it will be a pain. This is why if you hire a local handyman in kenosha, wi they should be able to come and fix it for you.

local handyman in kenosha, wi

How to fix a leaky faucet?

Some handymen may use a rubber washer, this will however only fix the problem for a short time. What you really need is to hire someone or do it yourself and get new parts. If you are going to do it yourself here is how.

First turn off the water from the main valve on top of your sink. Turning off the main valve will relieve the pressure. Then remove all of the faucet parts by taking out all screws and pulling off all pieces. Be sure to keep them in an organized spot so you know where everything goes back into place.

Take off the handle, sometimes there is a screw on the inside that holds it in place which might need loosening. Then remove the cartridge, which is the part with moving parts. It probably has some dirt and mineral deposits on it which can be cleaned off with vinegar.

Inspect the ball and spring that opens/closes position and make sure they are intact otherwise you will need to replace them. Replace any worn seals or broken parts of your faucet.

Once the parts are dry, reassemble everything in reverse order of what you took it off. Then turn on the water valve and check to make sure no leaks appear. You may need to turn it on and off a few times so that all air can escape from the system.